Home > Bike frames > Suspension frames

Picture of Cube Fritzz 160 Pro 27.5 Frame - Ex Display 2014

Cube Fritzz 160 Pro 27.5 Frame - Ex Display 2014 - £1049.99 £719.99

Save £330.00!

STATUS: EX-DISPLAY

  • Frame was on display in our warehouse showroom
  • Item is new, unused & in excellent condition
  • May show signs of handling and storage
  • Fully inspected prior to sale

    *** Please note frame only. Does NOT include shock, rear axle, headset or seat clamp ***

    Cube Fritzz 160 Pro 27.5 Frame

    Frame:

  • HPA Ultralight,
  • Advanced Hydroform
  • Triple Butted
  • ETC 4-Link
  • ISCG mount
  • AXH

  • Integrated Cable Routing: Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
  • Integrated Post Mount: The post mount rear brake system is found on all carbon fibre frames and top aluminium full suspension models. Two bolts and the IS adapter arent needed anymore, and fewer parts means less weight, in this case saving 30 grams. This may not sound a lot. But there's potential to save weight in every detail.
  • Press Fit BB: With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows the use of a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.
  • Tapered Steerer: This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of Cube's carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
  • Trail Motion Rocker: The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.
  • Anodized Surface: Anodizing is a chemical surface treatment process. The treatment hardens the surface, making the aluminium 1000 times more scratch-resistant than before. Adaptable X12 Hanger: Cube optimized their new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted, allowing the use of longer Direct Mount hangers. Shifting precision and stiffness are therefore improved and it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.
  • Advanced Hydroforming: The new STEREO, FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased.
  • Aluminium Ultralight: Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Cube's Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.
  • FSP4Link: The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.
  • Lazer Design Surface: On Cube's high performance aluminium frames, graphics and text are laser-cut into the material, making them indestructible for a lifetime.
    *** Please note frame only. Does NOT include shock, rear axle, headset or seat clamp ***

    On sale at Chain Reaction Cycles

  • click to buy

    See all Bike frames

    

    Reviews

    No comments yet.
    

    Add review