Home > Lights > Rear lights
Knog Blinder 1 LED Rear Light -
Knog Blinder 1 LED Rear Light
The Blinder 1’s high-powered surface-mounted single LED pumps out up to 11 lumens. Using its optimised optic focus the light ensures visibility at over 500 metres. With a weight of only 15 grams the light uses its tool-less attachment to securely connect to handlebars and frames of 22–32mm.
Knog Blinder 1 LED Rear Light Features:
- LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride.
- Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead.
- Light Modes: 5 light modes: Steady, Fast Flash, Organic Flash 1, Organic Flash 2, Eco-flash.
- Visibility: Light is visible at over 500 metres.
- Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. The light is switched off with a long button push off (0.5sec).
- Integrated USB Plug: Designed to be exposed to the elements, the plug is also waterproof and will not be damaged by exposure.
- Battery: Rechargeable Lithium polymer battery via integrated USB plug.
- Burn Time: Burn time of over 2-hours in constant and up to 11-hours eco-flash mode.
- Storage Mode: Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn’t being used.
- Charge the light for a full charge cycle. (indicator glows green when charged).
- Remove light from USB charging device / port.
- Turn light on in any mode.
- Hold button down for more than 5 seconds, at which point the indicator LED will turn red.
- The light itself will remain on until the Blinder switches itself off and into storage mode.
- Bike Attachment: Tool-less attachment for rear-posts and frames of 22–32mm ø
- 100% Waterproof: The Blinder 1 is IP66 Tested and 100% waterproof against all elements.
- Testing: The Blinder 1 has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.
Knog Blinder 1 LED Rear Light Specifications:
- Dimensions: 25 x 25 x 33mm
- Weight: 15g
- Materials: UV-Resistant Industrial grade silicone. Polycarbonate Lens, Latch and Housing. Hard anodised aluminium fascia.
- Rechargeable Lithium Polymer (USB). This saves using about 600 AAA Alkaline batteries during the lights lifetime
- Rear Light: 11 Lumens (LED Rating)
Buy Knog Blinder 1 LED Rear Light from Chain Reaction Cycles, the world's largest online bicycle store.
On sale at Chain Reaction Cycles
See all LightsNo comments yet.
Type in required words separated by spaces to search across selected mountain bike stores. A space represents 'AND', so all the words you enter will be present in either the product name or category. Use - (minus) to exclude single words and * as a wildcard, eg. roc*. Words must be of 3 letters or more.
Includes: Chain Reaction :: Wiggle :: Evans :: Merlin:: Halfords